Service manual

Chapter 3
3-65
F-3-426
3) Remove the spring [1] and the screw [2], and detach the arm [3].
F-3-427
4) Remove the 2 screws [1], and detach the drive unit [2].
F-3-428
5) Remove the spring [1], and detach the arm [2].
F-3-429
6) Remove the 2 gears [1] [3]; then, detach the 2 bearings [2] [4], and detach
the pickup roller unit [5].
F-3-430
3.3.8 Reader Unit
3.3.8.1 Removing the Rear Cover
0007-8454
1) Disconnect the cable [1] of the power supply assembly.
2) Open the face-up cover [2], and remove the 4 screws [3] of the rear cover.
F-3-431
3) Open the reader assembly [4], and lift to free the 2 claws [5].
F-3-432
4) Close the reader assembly; then, detach the rear cover[1].
F-3-433
3.3.8.2 Removing the Reader Assembly
0007-8455
1) Open the reader assembly, and remove the left and right E-rings [1]; then,
pull out the pin [2].
[1]
[2][3]
[1][2][3]
[1]
[2]
[1]
[2]
[1] [2]
[3][4]
[5]
[2]
[3]
[1]
[3]
[4]
[5]
[2]
[3]
[1]
[3]