Service manual

Chapter 3
3-66
F-3-434
When closing the reader assembly, be sure to push in the arm [1] first.
F-3-435
2) Open the left and right claws in the direction of the arrows, and detach the
hinge cover [1].
3) Free the 2 harness bands [1], and disconnect the 2 cables [2] connected to
the reader assembly.
F-3-436
4) Open the harness band [1], and disconnect the 2 cables connected to the
reader assembly.
F-3-437
5) Remove the 6 screws [1], and lift the reader unit to detach.
F-3-438
3.3.9 Flatbed Motor Unit
3.3.9.1 Removing the Rear Cover
0007-8082
1) Disconnect the cable [1] of the power supply assembly.
2) Open the face-up cover [2], and remove the 4 screws [3] of the rear cover.
F-3-439
3) Open the reader assembly [4], and lift to free the 2 claws [5].
F-3-440
4) Close the reader assembly; then, detach the rear cover[1].
[2]
[1]
[2]
[1]
[1]
[2]
[1]
[3]
[2]
[2]
[1]
[1]
[1]
[1]
[2]
[3]
[1]
[3]
[4]
[5]