Service manual

Chapter 3
3-71
F-3-470
3) Remove the 4 claws [1], and disconnect the connector [2]; then, detach the
ADF paper sensor [3].
F-3-471
3.3.12 DES Sensor
3.3.12.1 Removing the ADF Feed Sensor
0010-3733
1) Remove the stopper [1], and fully open the ADF unit [2].
F-3-472
2) Remove the 2 screws [1], and detach the ADF inside cover [2].
F-3-473
3) Free the harness [1] from the guide, and remove the screw [2]; then, detach
the sensor unit [3].
F-3-474
4) Disconnect the connector [1], and remove the 4 claws [4]; then, detach the
ADF feed sensor [3].
F-3-475
3.3.13 Speaker
3.3.13.1 Removing the Rear Cover
0007-8937
1) Disconnect the cable [1] of the power supply assembly.
2) Open the face-up cover [2], and remove the 4 screws [3] of the rear cover.
F-3-476
3) Open the reader assembly [4], and lift to free the 2 claws [5].
F-3-477
4) Close the reader assembly; then, detach the rear cover[1].
[2]
[1]
[1]
[2] [3]
[2]
[1]
[2]
[1]
[1][2] [3]
[1]
[2]
[2]
[3]
[2]
[3]
[1]
[3]
[4]
[5]