Service manual

Chapter 3
3-76
F-3-504
3.4.1.8 Removing the Laser Scanner Unit
0007-7972
1) Remove the face-down sub cover [1].
2) Disconnect the 3 connectors [2].
F-3-505
3) Remove the 4 screws [1], and free the harness [3] from the harness guide
[2]; then, detach the laser scanner unit [4].
F-3-506
3.5 IMAGE FORMATION SYSTEM
3.5.1 Rotary Drive Unit
3.5.1.1 Removing the Rear Cover
0007-8555
1) Disconnect the cable [1] of the power supply assembly.
2) Open the face-up cover [2], and remove the 4 screws [3] of the rear cover.
F-3-507
3) Open the reader assembly [4], and lift to free the 2 claws [5].
F-3-508
4) Close the reader assembly; then, detach the rear cover[1].
F-3-509
3.5.1.2 Removing the Reader Assembly
0007-8574
1) Open the reader assembly, and remove the left and right E-rings [1]; then,
pull out the pin [2].
F-3-510
[1]
[2]
[1]
[2]
[2]
[1]
[2]
[2]
[3] [4]
[2]
[3]
[1]
[3]
[4]
[5]
[2]
[3]
[1]
[3]
[2]
[1]
[2]
[1]