Service manual

Chapter 3
3-80
F-3-529
2) Disconnect the connector [1], and remove the 3 screws [2]; then, detach
the rotary drive assembly [3].
F-3-530
Be sure to tighten the self-tapping screw used to secure the rotary drive as-
sembly only at the end of the work.
3.5.2 Drum Cartridge Memory Tag Contact
3.5.2.1 Removing the Rear Cover
0007-8564
1) Disconnect the cable [1] of the power supply assembly.
2) Open the face-up cover [2], and remove the 4 screws [3] of the rear cover.
F-3-531
3) Open the reader assembly [4], and lift to free the 2 claws [5].
F-3-532
4) Close the reader assembly; then, detach the rear cover[1].
F-3-533
3.5.2.2 Removing the Reader Assembly
0007-8584
1) Open the reader assembly, and remove the left and right E-rings [1]; then,
pull out the pin [2].
F-3-534
When closing the reader assembly, be sure to push in the arm [1] first.
[2]
[1]
[1]
[1]
[1] [2][2]
[3]
[2]
[2]
[3]
[1]
[3]
[4]
[5]
[2]
[3]
[1]
[3]
[2]
[1]
[2]
[1]