Service manual

Chapter 3
3-82
F-3-542
3.5.2.5 Removing the Power Supply Assembly
0007-8638
1) Remove the 6 screws [1], and detach the power supply assembly [2].
F-3-543
3.5.2.6 Removing the Face-Down Cover
0007-8660
1) Remove the 2 screws [1], and slide the face-down cover [2] in downward
direction to detach.
F-3-544
3.5.2.7 Removing the Top Cover
0007-8678
1) Remove the claw [1], and detach the ring gear [2].
2) Free the link lever [3] from the shaft [4].
F-3-545
3) Remove the 3 binding screws [1] and 2 TP screws [2]; then, disconnect
the connector [3], and detach the top cover [4].
F-3-546
When attaching the top cover, be sure to match its 2 positioners [1] and the
2 cut-offs [2] of the face-down sub cover, while making sure that the paper
retainer [3] is not blocking the feed path.
[3]
[2]
[2]
[2]
[1]
[1]
[1]
[1]
[1]
[2]
[2]
[4]
[3]
[1]
[4]
[1]
[1]
[2]
[3]