Service manual

Chapter 3
3-104
F-3-680
3.5.7.5 Removing the Power Supply Assembly
0007-8645
1) Remove the 6 screws [1], and detach the power supply assembly [2].
F-3-681
3.5.7.6 Removing the Face-Down Cover
0007-8666
1) Remove the 2 screws [1], and slide the face-down cover [2] in downward
direction to detach.
F-3-682
3.5.7.7 Removing the Top Cover
0007-8683
1) Remove the claw [1], and detach the ring gear [2].
2) Free the link lever [3] from the shaft [4].
F-3-683
3) Remove the 3 binding screws [1] and 2 TP screws [2]; then, disconnect
the connector [3], and detach the top cover [4].
F-3-684
When attaching the top cover, be sure to match its 2 positioners [1] and the
2 cut-offs [2] of the face-down sub cover, while making sure that the paper
retainer [3] is not blocking the feed path.
[3]
[2]
[2]
[2]
[1]
[1]
[1]
[1]
[1]
[2]
[2]
[4]
[3]
[1]
[4]
[1]
[1]
[2]
[3]