Service manual

Chapter 3
3-121
3.5.12.2 Removing the Reader Assembly
0007-8575
1) Open the reader assembly, and remove the left and right E-rings [1]; then,
pull out the pin [2].
F-3-786
When closing the reader assembly, be sure to push in the arm [1] first.
F-3-787
2) Open the left and right claws in the direction of the arrows, and detach the
hinge cover [1].
3) Free the 2 harness bands [1], and disconnect the 2 cables [2] connected to
the reader assembly.
F-3-788
4) Open the harness band [1], and disconnect the 2 cables connected to the
reader assembly.
F-3-789
5) Remove the 6 screws [1], and lift the reader unit to detach.
F-3-790
3.5.12.3 Removing the Right Cover
0007-8594
1) Remove the 2 screws [1] of the side; then, remove the 3 claws [2] to detach
the left cover [3].
F-3-791
F-3-792
3.5.12.4 Removing the Left Cover
0007-8619
1) Remove the 2 screws [1] from the side; then, remove the 3 claws [2] to
detach the right cover [3].
[2]
[1]
[2]
[1]
[1]
[2]
[1]
[3]
[2]
[2]
[1]
[1]
[1]
[1]
[1]
[2]
[2]
[3]