Service manual

Chapter 3
3-124
F-3-805
2) Disconnect the connector [1], and remove the 3 screws [2]; then, detach
the rotary drive assembly [3].
F-3-806
Be sure to tighten the self-tapping screw used to secure the rotary drive as-
sembly only at the end of the work.
3.5.12.11 Removing the Toner Cartridge Motor
0007-8867
1) Disconnect the connector [1], and remove the screw [2]; then, detach the
toner cartridge motor [3] from the rotary drive assembly.
F-3-807
3.6 PICKUP AND FEEDING SYSTEM
3.6.1 Cassette Pickup Roller
3.6.1.1 Removing the Cassettes
0007-7056
1) Hold the grip, and take out the cassette.
3.6.1.2 Removing the Rear Cover
0007-7057
1) Disconnect the cable [1] of the power supply assembly.
2) Open the face-up cover [2], and remove the 4 screws [3] of the rear cover.
F-3-808
3) Open the reader assembly [4], and lift to free the 2 claws [5].
F-3-809
4) Close the reader assembly; then, detach the rear cover[1].
F-3-810
3.6.1.3 Removing the Right Cover
0007-7059
1) Remove the 2 screws [1] of the side; then, remove the 3 claws [2] to detach
the left cover [3].
[2]
[1]
[1]
[1]
[1] [2][2]
[3]
[2]
[1]
[2]
[3]
[2]
[3]
[1]
[3]
[4]
[5]
[2]
[3]
[1]
[3]