Service manual

Chapter 3
3-139
F-3-903
4) Close the reader assembly; then, detach the rear cover[1].
F-3-904
3.6.7.2 Removing the Reader Assembly
0007-8485
1) Open the reader assembly, and remove the left and right E-rings [1]; then,
pull out the pin [2].
F-3-905
When closing the reader assembly, be sure to push in the arm [1] first.
F-3-906
2) Open the left and right claws in the direction of the arrows, and detach the
hinge cover [1].
3) Free the 2 harness bands [1], and disconnect the 2 cables [2] connected to
the reader assembly.
F-3-907
4) Open the harness band [1], and disconnect the 2 cables connected to the
reader assembly.
F-3-908
5) Remove the 6 screws [1], and lift the reader unit to detach.
[4]
[5]
[2]
[3]
[1]
[3]
[2]
[1]
[2]
[1]
[1]
[2]
[1]
[3]
[2]
[2]
[1]