Service manual

Chapter 3
3-151
F-3-978
3.6.10 Main Motor
3.6.10.1 Removing the Rear Cover
0007-7974
1) Disconnect the cable [1] of the power supply assembly.
2) Open the face-up cover [2], and remove the 4 screws [3] of the rear cover.
F-3-979
3) Open the reader assembly [4], and lift to free the 2 claws [5].
F-3-980
4) Close the reader assembly; then, detach the rear cover[1].
F-3-981
3.6.10.2 Removing the Reader Assembly
0007-8487
1) Open the reader assembly, and remove the left and right E-rings [1]; then,
pull out the pin [2].
F-3-982
When closing the reader assembly, be sure to push in the arm [1] first.
F-3-983
2) Open the left and right claws in the direction of the arrows, and detach the
hinge cover [1].
3) Free the 2 harness bands [1], and disconnect the 2 cables [2] connected to
the reader assembly.
F-3-984
4) Open the harness band [1], and disconnect the 2 cables connected to the
reader assembly.
[1]
[2]
[2]
[3]
[1]
[3]
[4]
[5]
[2]
[3]
[1]
[3]
[2]
[1]
[2]
[1]
[1]
[2]
[1]
[3]