Service manual

Chapter 3
3-163
F-3-1055
3.7.5.8 Removing the Right Frame
0011-6608
1) Remove the 5 screws [1], and detach the right frame [2].
F-3-1056
3.7.5.9 Removing the Left Frame
0007-8893
1) Remove the 4 screws [1], and detach the left frame [2].
F-3-1057
3.7.5.10 Removing the Cassette Feeder
0007-8894
1) Lift the machine, and detach the cassette feeder [1].
F-3-1058
3.7.5.11 Removing the Shield Plate
0011-6624
1) Free the flat cable [1] from the connector.
2) Remove the 6 screws [2], and detach the shielding plate [3].
F-3-1059
3.7.5.12 Removing the Inside Cover
0007-8898
1) Remove the 2 claws [1], and detach the inside cover [2].
F-3-1060
3.7.5.13 Removing the Registration Clutch
0007-8899
1) Disconnect the connector [1], and open the harness band [2].
2) Remove the E-ring [3], and detach the registration clutch [4].
F-3-1061
The connector on the registration clutch side is designed to prevent discon-
nection. If you have to detach the registration clutch, be sure to disconnect
the connector (J113) on the DC controller PCB side.
[1]
[2]
[1]
[1]
[2]
[1]
[1]
[2]
[1]
[2]
[2]
[3]
[1]
[1]
[2]
[1][2] [3][4]