Service manual

Chapter 5
5-7
#DOWNLOAD
Do not use.
#CLEAR (data initialization mode)
Various data are initialized by selecting one of these setting items.
#ROM (ROM management)
ROM data such as the version number and checksum are displayed.
The effective SSSWs/parameters and their default values in this machine are shown in Service Data Flowchart. However, detailed descriptions of only service data
newly added to this machine are provided. For descriptions of other service data, which have been used with existing machines, please see the G3 Facsimile SERV-
ICE DATA HANDBOOK (Rev. 0), which is supplied separately.
5.5.1.3 Service Data Entry Method
0008-1830
You can enter the Service Mode with the following operation.
F-5-8
5.5.2 Service Soft Switch Settings (SSSW)
5.5.2.1 Outline
5.5.2.1.1 Explanation of # SSSW
0008-1883
The items registered and set by each of these switches comprise 8-bit switches. The figure below shows which numbers are assigned to which bits. Each bit has a
value of either 0 or 1.
F-5-9
Below are examples showing how to read bit switch tables.
F-5-10
5.5.2.2 SSSW-SW14
5.5.2.2.1 Details of Bit 0 and Bit 1
0008-1885
Set the type of document scanning size (standard paper) to be used.
The following types are set in accordance with the combination of parameters of Bit 0 and Bit1.
T-5-4
(Bit0, Bit1)= (0, 0) A-series document
(0, 1) inch-type document
(1, 0) A-series document
(1, 1) A-series document
Menu #
# SSSW
SW01
00000000
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3
Bit 2
Bit 1
Bit 0
Service error code
Not used
Not used
Not used
Not used
Not used
Not used
Not used
Output
-
-
-
-
-
-
-
Function
0
1
2
3
4
5
6
7
Bit 1 0
Indicates that the
setting is "1".
Indicates the
default settings.
Indicates that the
setting is "0".
Not Output*
-
-
-
-
-
-
-