[Mac] ScanGear MF User's Guide (V2.10.0)

Flow of Preparations for Scanning

Before using the driver and scanning, there are preparations that need to be done beforehand.

This driver is a macOS scanner driver for Canon devices. When it is installed, utility software for scanning data to

a computer called MF Scan Utility and MF Toolbox is also installed. The driver can connect to this utility software

to attach scanned images to e-mail and extract text from images.

This section describes the preparations required before scanning.

Carry out preparations and settings in the following order.

1. Obtain an installer by one of the following methods.

- Download it from the Canon website (http://www.canon.com/)

- Supplied CD-ROM

2. Install the driver to the operating system.

3. Check the utility software (MF Scan Utility or MF Toolbox) that supports the scanner you are using.

4. Register the scanner you want to use to the operating system.

NOTE

● You can check the version of the installed driver or utility software from the menu bar.