[Mac] ScanGear MF User's Guide (V2.10.0)

Installing the Driver
This section explains the procedure for installing the driver to the operating system.
Install the driver and register the scanner to use.
Prerequisites
Conrm that the following conditions are satised. Complete the preparation operations.
● Obtain the driver installer.
● System Requirements(P. 14)
● Close all running applications.
● If the computer and device are connected by USB, turn off the main power of the device.
Procedure
1
Open the driver installer folder → select [Canon_ScanGear_MF.pkg] or
[Canon_Driver.pkg].
2
Read the Software License Agreement → click [Continue].
If a dialog box asking you to conrm that you agree to the Software License Agreement is displayed, click
[Agree].
3
Click [Install].
If a dialog box for entering a user name and/or password is displayed, enter the name and password of a
computer administrator and continue according to the instructions in the dialog box.
4
Click [Close].
Install the MF Scan Utility and MF Toolbox required to register the scanner.
Register the scanner.
Related Topics
Flow of Preparations for Scanning(P. 12)
Registering an MF Scan Utility Compatible Scanner(P. 18)
Registering an MF Toolbox Compatible Scanner(P. 21)
Installing the Driver
16