[Mac] ScanGear MF User's Guide (V2.10.0)

About Guidelines for Resolution Settings

When scanning, if you set a high resolution (increase the numerical value), the image will be extremely detailed,

and if you set a low resolution (decrease the numerical value), the image will be rough.

Guidelines for resolutions to set and the purpose of a scanned image are shown below.

● 150dpi

- Color printing

- Use in a web site

- Attaching to an email

● 300dpi

- Black-and-white printing

- Saving images to a computer

If you want to magnify the scanned image and print it, set a resolution higher than the above guidelines.

You can set resolution in one of the following settings.

● When using the MF Scan Utility: the [Scan Options] panel of [Settings] > [Resolution]

● When using the MF Toolbox: the [Scan] panel > [Resolution]

● When using the ScanGear MF: the [Advanced Mode] panel > [Output Settings] > [Resolution]

NOTE

● If you set the output resolution at double, the size of the image data will quadruple. If the amount of data is

too high, errors such as insucient memory could easily occur, therefore set the minimum resolution

required for the purpose.