[Mac] ScanGear MF User's Guide (V2.10.0)
When scanning, sets the position to place the original (the platen glass or feeder), the color mode, original size,
etc.
[Scanning Method]
When scanning, sets the position to place the original (the platen glass or feeder).
If you select [Auto Mode], the original will be scanned from the feeder if it is set in the feeder. If the original is
not set in the feeder, the device will scan from the platen.
[Color Mode]
Species the color mode of the original to be scanned.
[Paper Size]
Sets the size of the original to be scanned.
If you select [Custom], you can set any desired original size.
[Resolution]
Species a resolution when scanning.
[Document Scan Orientation Settings]
When the original is set in the feeder, set the scanning direction to match the orientation of the original.
[Scan both sides when scanning from the feeder]
Specify this when scanning both sides of an original set in the feeder.
[Image Processing Settings]
Sets a detailed image processing method. If you click [
], you can set the following items.
[Correct black text]
Claries the contours of black text.
[Sharpen outline]
Emphasizes the contours of images to give them a sharp effect. This is effective when scanning
photographs etc. that are out of focus.
[Reduce moire]
Settings List
38