[Mac] ScanGear MF User's Guide (V2.10.0)

[Open the Storage Location After Scanning Is Finished]

Opens the folder where the scanned image has been saved after scanning.

[External Program] Panel

[Program to Start After Scanning Is Finished]

Starts the application set for the scanned image.

[Preferences] Dialog

Sets the computer that sends scan data, the button names for scanning methods displayed in the main dialog

box, etc.

[Start Key on the Scanner]

When initiating scanning from the device, species which method registered in MF Toolbox to scan with or

whether to display the main dialog box.

[Computer Name]

Sets the computer name to be displayed as the scan data transmission destination in the device.

[Button 1]-[Button 4]

Sets the [Display Name] and [Comment] of the buttons displayed in the main dialog box. Depending on the

device, the set comment may be displayed at the device when scanning.

[Color Scan]/[B&W Scan]/[Custom 1]/[Custom 2]

Sets the [Comment] of the buttons displayed in the main dialog box. Depending on the device, the set comment

may be displayed at the device when scanning.

Settings List