[Mac] ScanGear MF User's Guide (V2.10.0)

[Simple Mode] Panel

This panel combines the basic settings of the ScanGear MF scan settings. If you operate them in order of [1] to

[3] in the panel, you can congure and scan with all the necessary settings.

[Select Source]

Sets the type, color, and where the original has been set. The image settings are adjusted according to the state

of the original. If you select [Magazine (Color/Platen Glass)], you can reduce inconsistencies in contrast and

moire patterns that occur when scanning printed materials.

[Preview]

When the original is set on the platen, this previews the current settings. The cropping frame that indicates the

scanning area is displayed as dotted lines in the preview. In the preview, you can adjust the settings while

checking the image.

[Select Purpose]

Species the intended use of a scanned image. The resolution is set according to the intended use.

[Output Size]

Species the printed size or displayed size of the image according to the purpose of use in [Select Purpose]. If

you select [Flexible], you can change the size by dragging the cropping frame displayed in the preview.

If you select [Add/Delete], you can register the output size. You can register a maximum of 10 output sizes for

each purpose of use in [Select Purpose].

Clicking [

Adjust Cropping Frames] switches the cropping frame between horizontal and vertical and

switches the orientation of the output size. You cannot operate this if [Flexible] is selected.

[Scan]

Scans the original with the current settings. when cropping frames have not been set, it scans the entire

original.

[Advanced Mode] Panel

Adjusts the image quality in more detail than the [Simple Mode] panel.

[Input Settings]

Sets the setting method, size, and color mode of the original.

[Original Placement]

Species the method of setting the original in the device.

[Scan Size]

Species the scan size when scanning an original. The same size as the original is normally selected.

If you select [Add/Delete], you can set any desired size.

Settings List