ScanGear MF v2.14.0 User Guide for Mac (pdf)
[Orientation]
If you set the original in the feeder, this is set to match the orientation of the original, Also, when you set a
double-sided original, you can also set [Book Opening].
[Color Mode]
Species the color mode of the original to be scanned.
[Output Settings]
Sets the output resolution and output size.
[Resolution]
Species the resolution according to the purpose of the image.
[Output Size]
Species the print size or display size of the scanned image.
If you select [Add/Delete], you can set any desired size.
Clicking [
] changes the direction of the cropping frame and switches the orientation of the output size.
When [Flexible] is selected, you can drag and select the part you want to scan in the image displayed in the
preview to set the output size.
If you select [Add/Delete], you can register the output size. You can register a maximum of 10 output sizes for
each [Purpose] in [Add/Delete].
[Data Size]
In the [Resolution] and [Output Size] settings, the image data size is displayed when scanning an original.
[Image Settings]
When scanning a photographic original, this corrects scratches and color fade.
You can set this when color or [Grayscale] is selected in [Input Settings] > [Color Mode].
[Use Unsharp Mask]
Emphasizes the contours of images to give them a sharp effect. This is effective when scanning photographs
etc. that are out of focus.
[Use Descreen]
Reduces density inconsistencies and moire (striped) patterns that occur when scanning printed photographs,
color magazines, etc.
[Correct Black Text]
Claries the contours of black text.
[
](Threshold)
Adjusts the threshold value for black and white images.
You can set this when [Black and White] is selected in [Input Settings] > [Color Mode].
[Threshold Level]
When scanning with two tones of black and white, changes the threshold value and adjusts the contrast.
[Color Settings]
Congures settings relating to color matching and gamma adjustment.
Settings List
49