[Windows] UFR II/UFRII LT Printer Driver Installation Guide (V21.75)

3
Click [Add a local printer] (or [Add a local printer or network printer with manual
settings]).
4
Select [Create a new port] → select [Standard TCP/IP Port] from [Type of port] → click
[Next].
When selecting a temporary port, select [Use an existing port] → temporary port ([LPT1] etc.) → proceed to step
7.(P. 39)
5
Enter the IP address of the device in [Hostname or IP address] → proceed according to
the instructions on the screen.
If the device cannot be found, it may be recognized as an unknown device. If so, click "Open details."
In Windows Vista/7/8/8.1/10/Server 2008/Server 2008 R2/Server 2012/Server 2012 R2, if the device cannot be
found, perform the following procedure.
(1) Display the device manager.
Windows Server 2003/Server 2003 R2: Right-click [My Computer] > [Administration] > [Device Manager].
Windows Vista/Server 2008: [Control Panel] > [System and Maintenance] > [Device Manager].
Windows 7/8/8.1/Server 2008 R2/Server 2012/Server 2012 R2: [Control Panel] > [Hardware and Sound] >
[Device Manager].
Windows 10: [Settings] > [Devices] > [Printers & scanners] > [Device Manager] at the bottom of the screen.
(2) Select [Other devices] > [Unknown Device] → click the [Action] menu > [Update Driver] or [Update
Driver Software].
The driver software update wizard is displayed.
(3) Click [Browse my computer for driver software] > [Let me pick from a list of device drivers on my
computer].
(4) Select [Printers] from [Common hardware types] → click [Next].
(5) Click [Have Disk] → proceed to step 8.(P. 39) .
6
Click [Finish].
The procedure for adding the port is nished. Install the driver.
7
In the [Add a printer] screen, click [Have Disk].
8
Click [Browse] → select the folder where the prepared inf le is stored → click [OK].
Installation Without Using the Installer
39