Generic Plus UFR II Printer Driver v1.21 Installation Guide for Windows (pdf)
Installing by Discovering Devices on a Network
You can search for devices on TCP/IP networks when installing the driver.
During installation, the conguration prole and device functions corresponding to the printer model are
automatically set. You can also change or import a conguration prole if necessary.
NOTE
● For network environments other than TCP/IP, refer to the procedure for installing by specifying a port or IP
address.
● If you do not know the network environment you are using, check with your network administrator.
Prerequisites
● System Requirements(P. 15)
● Enabling settings for both [Use WSD] and [Multicast Discovery Settings] at the device (for network
environments that use WSD)
● Page description language selection (Plug & Play) function setting of the device
Set [PDL Selection (Plug and Play)] at the device to match the driver you are using. For details about the
setting method, refer to the manual of the device.
● The device is one that is on the same subnet as the computer you are using
● Notes and Warnings Regarding Installation(P. 17)
● When starting the computer, logon as a member of Administrators.
● Display the [Desktop] screen (when using Windows 8.1/Server 2012/Server 2012 R2).
Procedures
1
Start the installer.
If you are using an installer downloaded from the web site:
Double-click the downloaded le to decompress it. If the installer does not start automatically after it is
decompressed, double-click [Setup.exe].
If you are using the accompanying CD-ROM:
(1) Set the CD-ROM in the computer → click [Installation].
(2) In the [Installation] screen, conrm the driver → click [Installation].
If the CD-ROM menu is not displayed, click the subsequent "Open details".
Start the installer by following the procedure below.
- If a message prompting you to insert a CD-ROM is displayed or if Windows Explorer is displayed: Execute
[MInst.exe].
- If nothing is displayed: Double-click the CD-ROM icon.
- If the above [MInst.exe] does not exist: Execute [Setup.exe] in the driver folder of the CD-ROM.
2
Select a language → click [Next].
Installing the Driver
21