Generic Plus UFR II Printer Driver v1.21 Installation Guide for Windows (pdf)
Installing Using a USB Connection
You can connect the device and computer with a USB cable and install the driver.
During installation, the conguration prole corresponding to the printer model is automatically set. You can
change or import the conguration prole if necessary.
Prerequisites
● System Requirements(P. 15)
● Installation of the optional USB interface board (if required with the device you are using)
● Page description language selection (Plug & Play) function setting of the device (if required with the device
you are using)
Set [PDL Selection (Plug and Play)] at the device to match the driver you are using. For details about the
setting method, refer to the manual of the device.
● Notes and Warnings Regarding Installation(P. 17)
● When starting the computer, logon as a member of Administrators.
● Display the [Desktop] screen (when using Windows 8.1/Server 2012/Server 2012 R2).
Procedures
1
Turn off the device.
2
Start the installer.
If you are using an installer downloaded from the web site:
Double-click the downloaded le to decompress it. If the installer does not start automatically after it is
decompressed, double-click [Setup.exe].
If you are using the accompanying CD-ROM:
(1) Set the CD-ROM in the computer → click [Installation].
(2) In the [Installation] screen, conrm the driver → click [Installation].
If the CD-ROM menu is not displayed, click the subsequent "Open details".
Start the installer by following the procedure below.
- If a message prompting you to insert a CD-ROM is displayed or if Windows Explorer is displayed: Execute
[MInst.exe].
- If nothing is displayed: Double-click the CD-ROM icon.
- If the above [MInst.exe] does not exist: Execute [Setup.exe] in the driver folder of the CD-ROM.
3
Select a language → click [Next].
4
Read the CANON SOFTWARE LICENSE AGREEMENT → click [Yes].
Installing the Driver
31