[Windows] Generic Plus UFR II Printer Driver Installation Guide (V1.02)

Installing by Discovering Devices on a Network

You can search for devices on TCP/IP networks when installing the driver.

During installation, the conguration prole and device functions corresponding to the printer model are

automatically set. You can also change or import a conguration prole if necessary.

NOTE

● For network environments other than TCP/IP, refer to the procedure for installing by specifying a port or IP

address.

● If you do not know the network environment you are using, check with your network administrator.

Prerequisites

Conrm that the following conditions are satised. Make sure all preparations have been completed.

● System Requirements(P. 15)

● Enabling settings for both [Use WSD] and [Multicast Discovery Settings] at the device (for network

environments that use WSD)

● Page description language selection (Plug & Play) function setting of the device

Set [PDL Selection (Plug and Play)] at the device to match the driver you are using. For details about the

setting method, refer to the manual of the device.

● The device is one that is on the same subnet as the computer you are using

● Notes and Warnings Regarding Installation(P. 17)

● When starting the computer, logon as a member of Administrators.

● Display the [Desktop] screen (when using Windows 8/8.1/Server 2012/Server 2012 R2).

Procedure

Start the installer.

If you are using an installer downloaded from the web site:

Double-click the downloaded le to decompress it. If the installer does not start automatically after it is

decompressed, double-click [Setup.exe].

If you are using the accompanying CD-ROM:

(1) Set the CD-ROM in the computer → click [Installation].

(2) In the [Installation] screen, conrm the driver → click [Installation].

If the CD-ROM menu is not displayed, click the subsequent "Open details".

Start the installer by following the procedure below.

- If a message prompting you to insert a CD-ROM is displayed or if Windows Explorer is displayed: Execute

[MInst.exe].

- If nothing is displayed: Double-click the CD-ROM icon.

- If the above [MInst.exe] does not exist: Execute [Setup.exe] in the driver folder of the CD-ROM.

Installing the Driver