[Windows] Generic Plus UFR II Printer Driver Installation Guide (V1.02)

Change [Printer Name] → click [Next].

[Conguration Prole] > [Change]: Click this only when you need to change or import a conguration prole.

Click the subsequent "Open details" and perform the necessary operations.

Select a conguration prole.

When manually selecting a conguration prole:

Select a conguration prole from [Conguration Prole] → click [OK].

When importing a conguration prole:

Click [Import] → select a conguration prole le (*.typ) → click [OK].

IMPORTANT

● If the device is connected to the computer you are using, under normal circumstances, set the installer so

that the conguration prole is automatically selected. If the computer cannot be connected to the device

and device information cannot be retrieved, or if it is necessary to customize the conguration prole,

manually select the conguration prole or import an exported prole.

[Set as Default]: Select this to set the device as the device that is normally used.

[Use as Shared Printer]: Select this if you want to share the device.

Installing the Driver