[Windows] Generic Plus UFR II Printer Driver Installation Guide (V1.02)

Installing by Specifying a Port or IP Address

You can manually specify the port or IP address to use for network connected or locally connected devices and

install the driver. Install according to this procedure when you cannot automatically discover a device on the

network or when unique settings are required.

As well as using an existing port, you can add a standard TCP/IP port or a network printer port.

If the device is connected during installation, a conguration prole corresponding to the printer model is set.

You can also change or import the conguration prole if necessary.

Prerequisites

Conrm that the following conditions are satised. Make sure all preparations have been completed.

● System Requirements(P. 15)

● Notes and Warnings Regarding Installation(P. 17)

● Conrm the port to be specied.

Specify a standard TCP/IP port or a network printer port. You can specify an already registered port. You can

select a temporary port ([LPT1] etc.) and set it after installation is complete.

● Conrm the name or IP address of the device (if adding a standard TCP/IP port).

If you are installing by adding a standard TCP/IP port, you need to enter the name and IP address of the

device. For the name of the device, use the name by which the device is known on the network. If you do not

know the name or IP address of the device, check with your network administrator.

● When starting the computer, logon as a member of Administrators.

● Display the [Desktop] screen (when using Windows 8/8.1/Server 2012/Server 2012 R2).

Procedure

Start the installer.

If you are using an installer downloaded from the web site:

Double-click the downloaded le to decompress it. If the installer does not start automatically after it is

decompressed, double-click [Setup.exe].

If you are using the accompanying CD-ROM:

(1) Set the CD-ROM in the computer → click [Installation].

(2) In the [Installation] screen, conrm the driver → click [Installation].

If the CD-ROM menu is not displayed, click the subsequent "Open details".

Start the installer by following the procedure below.

- If a message prompting you to insert a CD-ROM is displayed or if Windows Explorer is displayed: Execute

[MInst.exe].

- If nothing is displayed: Double-click the CD-ROM icon.

- If the above [MInst.exe] does not exist: Execute [Setup.exe] in the driver folder of the CD-ROM.

Select a language.

Installing the Driver