[Windows] Generic Plus UFR II Printer Driver Installation Guide (V1.02)
Setting up Clients of a Shared Printer
This explains the procedure for enabling printing from a client computer (hereafter referred to an "a client")
using a print server on the same network.
In environments where Windows Update can be used, it is not necessary to use the installer in order for the
newest driver to be installed when selecting a print server.
Prerequisites
Conrm that the following conditions are satised. Make sure all preparations have been completed.
● Congure the share settings of the print server driver.
If the types of operating systems on the print server and clients differ, install the drivers for operating
systems supported by the clients on the print server.
● When starting the computer, logon as a member of Administrators.
NOTE
● If you are conguring the settings of a client in a workgroup environment, the user name and password for
logging onto the client must match the user name and password registered in the server.
Procedure
1
Display [Network] in Windows Explorer.
2
Double-click the computer (print server) you have set for print sharing.
3
Double-click the icon of the device for installation.
4
Click [Yes] in the displayed message.
5
Congure the settings according to the instructions in the wizard.
6
Restart the computer after installation is complete.
NOTE
● The driver settings of the server may not be reected in the clients. If this happens, the driver version of the
clients may be older than that of the print server. Always update the client drivers to the newest version
together with print server updates.
Changing Settings to Match the Usage Environment
44