[Windows] Generic Plus UFR II Printer Driver Installation Guide (V1.02)

When using an existing port:
Select a port from [Port].
When adding a standard TCP/IP port:
(1) Click [Add Port] → select [Standard TCP/IP Port] from [Available port types] → click [New Port].
(2) Enter the device name or IP address according to the instructions of the wizard.
[Port Name] is automatically entered. Change the port name if required.
If the [Additional port information required] screen is displayed, click the subsequent "Open details" and
perform the necessary operations.
Perform one of the following.
- Return to the previous screen in the wizard → re-enter the information for [Printer Name or IP Address] →
click [Next].
- Select [Device Type] > [Standard] > [Canon Network Printing Device with P9100] → click [Next].
Depending on the device you are using, the name you select in [Device Type] > [Standard] may differ from
[Canon Network Printing Device with P9100].
(3) Click [Finish] → click [Close] in the [Printer Ports] dialog box.
4
If you want to congure the standard TCP/IP port, click [Congure Port].
Changing Settings to Match the Usage Environment
47