[Windows] Generic Plus UFR II Printer Driver Installation Guide (V1.02)
5
Congure the port.
When using Raw:
Select [Raw] for [Protocol] → click [OK].
When using LPR:
(1) Select [LPR] for [Protocol] → specify one of the following print queues for [LPR Settings] > [Queue Name].
LP: Outputs according to the spool setting of the device. This is the setting that is normally used.
SPOOL: Always outputs after spooling to the hard disk, regardless of the device settings.
DIRECT: Always outputs without spooling to the hard disk, regardless of the device settings.
(2) Click [OK].
Changing Settings to Match the Usage Environment
48