[Windows] Generic Plus UFR II Printer Driver Installation Guide (V1.02)

Importing a Conguration Prole
This explains the procedure for importing an exported conguration prole le (*.typ) and setting the device
information.
If you cannot acquire the device information, you can apply it by importing a conguration prole exported in
an environment where the information could be acquired.
IMPORTANT
● If a conguration prole suitable for the device you are using is not selected, some of the device functions
may not be usable.
Prerequisites
Conrm that the following conditions are satised. Make sure all preparations have been completed.
● Settings at the device
- If the device is connected via a WSD port, [Use WSD Browsing] is already set to on.
- If the device is connected by specifying a standard TCP/IP port, [Retrieve Printer Mngt. Information from
Host] is already set to on.
For details, refer to the manual of the device.
● When starting the computer, log on as a member of Administrators.
Procedure
1
Display [Devices and Printers] from the [Control Panel] of Windows.
2
Right-click the icon of the device you are going to set → select [Printer properties]
from the displayed menu.
If you are using the driver with multiple device models, select the model you are going to set after selecting
[Printer properties].
3
Display the [Device Settings] sheet → click [Change].
Making the Device Functions Usable
66