Getting Started Guide

8
Connecting the Power Cord
1.
Turn ON the power of
the machine.
2.
Specify initial settings.
Select with [ ] or [ ],
and then press [OK].
Turning the Power ON and Specifying the Initial
Settings
Press the power switch.
Language
French
Spanish
Portuguese
English
Do not connect the USB cable. Connect the USB cable when installing the software.
Check and press [OK].
Open back cover; see
if orange packing
material is removed.
Next
Select with [ ] or [ ],
and then press [OK].
Check and press [OK].
Check that tabs/tape
are removed from
toner cartridge.
Next
Select Country/Region
United States (US)
Canada (CA)
Brazil (BR)
Mexico (MX)
Make sure that the machine is off. Plug the power plug into the
power socket.
Plug the power
plug into a AC
power outlet.