Windows Generic Plus PS3 Printer Driver Installation Guide USRMA-2160-01 2018-02 en Copyright CANON INC.
Contents Introduction ....................................................................................................................................................... 2 How to Use the Manual ............................................................................................................................................. 3 Notations Used in the Manual Disclaimers Copyright ....................................................................................................................
Uninstalling the Shortcut to the Online Manual ....................................................................................................... 77 Printing ................................................................................................................................................................ 79 Printing from a Computer How to Refer to the Help ....................................................................................................................................
Introduction Introduction Introduction .......................................................................................................................................................... 2 How to Use the Manual ......................................................................................................................................... 3 Notations Used in the Manual ..........................................................................................................................
Introduction Introduction How to Use the Manual(P. 3) Disclaimers(P. 5) Copyright(P. 6) Trademarks(P.
Introduction How to Use the Manual This explains things that you need to know in order to use this manual. Notations Used in the Manual(P.
Introduction Notations Used in the Manual This explains symbols and settings used in this manual. Symbols Used in This Manual In this manual, explanations of items and operations that must be followed while using the driver are set forth the symbols that indicate the following. IMPORTANT ● Indicates operational requirements and restrictions. Be sure to read these items carefully to operate the product correctly, and avoid damage to the product.
Introduction Disclaimers The information in this document is subject to change without notice. CANON INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, EITHER EXPRESS OR IMPLIED, EXCEPT AS PROVIDED HEREIN, INCLUDING WITHOUT LIMITATION, THEREOF, WARRANTIES AS TO MARKETABILITY, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OF USE OR NON-INFRINGEMENT. CANON INC.
Introduction Copyright Copyright CANON INC. 2018 No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written permission of Canon Inc.
Introduction Trademarks Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. macOS is a trademark of Apple Inc. Other product and company names herein may be the trademarks of their respective owners.
About This Driver About This Driver About This Driver ...............................................................................................................................................
About This Driver About This Driver This is a generic printer driver that supports various devices. You can use the same driver for all printer models by changing the settings for the printing port and device information. Features ● Information regarding the functions and options of the device are collectively defined in a "configuration profile." By switching "configuration profiles," you can switch the driver settings screen to match the functions of the device.
About This Driver Importing a Configuration Profile(P.
Before Use Before Use Before Use ............................................................................................................................................................
Before Use Before Use ● The newest driver software is posted on the Canon web site. Please verify the operating environment etc. and download the appropriate software as required. Canon Global Site: http://www.canon.com/ ● The functions that you can use may vary according to the following conditions.
Pre-installation Check Pre-installation Check Pre-installation Check ................................................................................................................................... 14 System Requirements ......................................................................................................................................... 15 Notes and Warnings Regarding Installation .....................................................................................................
Pre-installation Check Pre-installation Check This explains what to confirm beforehand in order to install the driver correctly. System Requirements(P. 15) Notes and Warnings Regarding Installation(P. 17) About the Readme File(P.
Pre-installation Check System Requirements This driver can be used with the following systems and environments. Operating Systems Windows 7/8.1/10 Windows Server 2008/2008 R2/2012/2012 R2/2016 For server-based computing environments: Operating systems in a server environment: Windows Server 2008/2008 R2/2012/2012 R2/2016 Server components: Citrix Presentation Server 4.5 Citrix XenApp 5.0/6.0/6.5/7.5/7.6/7.7/7.8/7.9/7.11/7.12 Citrix XenDesktop 4.0/5.0/5.5/5.6/7.0/7.1/7.5/7.6/7.7/7.8/7.9/7.11/7.
Pre-installation Check Scope of Guaranteed Operation Language of operating system included in supported driver languages Language of operating system not included in supported driver languages Installed with language matching the operating system Guaranteed -- Installed with language not matching the operating system Guaranteed*1 Not guaranteed*2 Changed to language not matching the operating Guaranteed*1 system after installation Not guaranteed*2 *1 The layout may be broken or the driver may not
Pre-installation Check Notes and Warnings Regarding Installation Take care of the following items when installing. ● If a screen requiring you to allow changes to the computer is displayed, allow the changes. ● If a Windows Security screen indicating that the publisher of the driver cannot by verified is displayed, allow installation.
Pre-installation Check About the Readme File Restrictions and precautions regarding installing drivers or using drivers are included in the Readme file. The Readme file is stored under the following name within the package folder of the driver. Readme_en-US.hta Also, if you are installing using the installer, you can refer to the Readme in the screen for selecting [Printer Setup].
Installing the Driver Installing the Driver Installing the Driver ....................................................................................................................................... 20 Installing by Discovering Devices on a Network ............................................................................................... 21 Installing by Specifying a Port or IP Address .....................................................................................................
Installing the Driver Installing the Driver Select the installation method suitable to the connection method and environment of the device you are using. Installing by Discovering Devices on a Network(P. 21) Installing by Specifying a Port or IP Address(P. 26) Installing Using a USB Connection(P. 31) Installing by Specifying an inf File(P. 35) Installing Using a WSD Port(P. 37) Installing a Shortcut to the Online Manual(P.
Installing the Driver Installing by Discovering Devices on a Network You can search for devices on TCP/IP networks when installing the driver. During installation, the configuration profile and device functions corresponding to the printer model are automatically set. You can also change or import a configuration profile if necessary. NOTE ● For network environments other than TCP/IP, refer to the procedure for installing by specifying a port or IP address.
Installing the Driver 3 Read the CANON SOFTWARE LICENSE AGREEMENT → click [Yes]. 4 Select [Standard] → click [Next]. [Reactivate Printers in the Sleep Mode and Search]: Select this when you want to detect devices on the network that are in sleep mode. 5 Select the required items → click [Next]. [Canon Driver Information Assist Service]: Select this when you want to use the acquire device information function in a print server environment.
Installing the Driver 6 Select the device to install from [Printer List]. [IPv4 Devices]/[IPv6 Devices]/[WSD Devices]: You can switch displays by clicking the tabs. If the device is not displayed in [Printer List], click [Search Again]. If the device is still not displayed after researching, select [Custom] and install by specifying a port or IP address.
Installing the Driver 8 Change [Printer Name] → click [Next]. [Configuration Profile] > [Change]: Click this only when you need to change or import a configuration profile. Click the subsequent "Open details" and perform the necessary operations. Select a configuration profile. When manually selecting a configuration profile: Select a configuration profile from [Configuration Profile] → click [OK]. When importing a configuration profile: Click [Import] → select a configuration profile file (*.
Installing the Driver 9 Check [Printer List for Driver Installation] → click [Start]. [Select Printers to Update]: Click this when there are printers you do not need to update. Proceed with the installation according to the instructions on the screen. 10 Click [Restart] or [Exit]. If device information cannot be acquired during installation, set the device information before printing. You can also change or import the configuration profile at the same time.
Installing the Driver Installing by Specifying a Port or IP Address You can manually specify the port or IP address to use for network connected or locally connected devices and install the driver. Install according to this procedure when you cannot automatically discover a device on the network or when unique settings are required. As well as using an existing port, you can add a standard TCP/IP port or a network printer port.
Installing the Driver 3 Read the CANON SOFTWARE LICENSE AGREEMENT → click [Yes]. 4 Select [Custom] → click [Next]. 5 If the following screen is displayed, select [Add New Printers] → click [Next]. [Update Existing Printer Drivers]: Select this if you want to update drivers only. When you select this, in the next screen, click [Select Printers to Update] → select the device to update from [Printer List] → click [OK]. Then click [Start] → skip to step 9.(P.
Installing the Driver 6 Set the port.
Installing the Driver (1) Click [Add Port] → select [Standard TCP/IP Port] from [Port to Add] → click [OK]. (2) Enter the device name or IP address according to the instructions of the wizard. [Port Name] is automatically entered. Change the port name if required. If the [Additional port information required] screen is displayed, click the subsequent "Open details" and perform the necessary operations. Perform one of the following.
Installing the Driver 8 Check [Printer List for Driver Installation] → click [Start]. Proceed with the installation according to the instructions on the screen. 9 Click [Restart] or [Exit]. If device information cannot be acquired during installation, set the device information before printing. You can also change or import the configuration profile at the same time. Related Topics Installing as a Print Server(P. 42) Changing the Port(P. 46) Setting Device Information(P. 53) Updating the Driver(P.
Installing the Driver Installing Using a USB Connection You can connect the device and computer with a USB cable and install the driver. During installation, the configuration profile corresponding to the printer model is automatically set. You can change or import the configuration profile if necessary. Prerequisites ● System Requirements(P.
Installing the Driver 5 6 Select [USB Connection] → click [Next]. When the following screen appears, connect the device and computer with a USB cable → turn on the device. [Skip]: If correctly connected by USB, in this screen you can finish the installation without waiting for automatic completion.
Installing the Driver Proceed with the installation according to the instructions on the screen. If installation fails in the above screen, click the subsequent "Open details" and perform the necessary operations. Reinstall the driver after performing the following procedure. (1) Connect the device and computer with a USB cable → turn on the device. (2) Display [Device Manager]. In Windows 10/Server 2016 Right-click [ ] → click [Device Manager]. In Windows 7/Server 2008 R2/8.
Installing the Driver Select a configuration profile from [Configuration Profile] → click [OK]. When importing a configuration profile: Click [Import] → select a configuration profile file (*.typ) → click [OK]. IMPORTANT ● If the device is connected to the computer you are using, under normal circumstances, set the installer so that the configuration profile is automatically selected.
Installing the Driver Installing by Specifying an inf File You can install a driver by specifying an inf file with the add printer function of Windows. The following explanation will be given with respect to installation with a standard TCP/IP port. Prerequisites ● System Requirements(P. 15) ● Confirm the IP address of the device. ● Prepare the inf file. Acquire the driver from the Canon web site (http://www.canon.com/) or the supplied CD-ROM, and prepare the inf file.
Installing the Driver Right-click [ ] → click [Device Manager]. In Windows 7/Server 2008 R2/8.1/Server 2012/Server 2012 R2 Display [Control Panel] > [Hardware and Sound] > [Device Manager]. In Windows Server 2008 Display [Control Panel] > [System and Maintenance] > [Device Manager]. (2) Select [Other devices] > [Unknown Device] → select [Update Driver Software] from the [Action] menu.
Installing the Driver Installing Using a WSD Port This explains the procedure for searching for devices on a network from Windows using a WSD (Web Services on Devices) port and installing the driver. IMPORTANT ● If you install using a WSD port, you cannot use the acquire device information function. ● If you want to install multiple drivers, share a standard TCP/IP port. You cannot install multiple drivers using a WSD port. Prerequisites ● System Requirements(P.
Installing the Driver Installing a Shortcut to the Online Manual This explains the procedure for installing a shortcut to the website where online manuals for Canon products are available. 1 Insert the supplied CD-ROM into your computer. 2 Click [Installation]. If the CD-ROM menu is not displayed, click the subsequent "Open details". Start the installer by following the procedure below. - If a message prompting you to insert a CD-ROM is displayed or if Windows Explorer is displayed: Execute [MInst.
Changing Settings to Match the Usage Environment Changing Settings to Match the Usage Environment Changing Settings to Match the Usage Environment ................................................................ 40 Using a Shared Printer ........................................................................................................................................ 41 Installing as a Print Server ........................................................................................................
Changing Settings to Match the Usage Environment Changing Settings to Match the Usage Environment This explains shared printer settings, switching ports, and installing the PPD files. Using a Shared Printer(P. 41) Changing the Port(P. 46) Installing the PPD File(P.
Changing Settings to Match the Usage Environment Using a Shared Printer This explains the setting procedure for sharing a device with computers on the same network. Installing as a Print Server(P. 42) Setting up Clients of a Shared Printer(P.
Changing Settings to Match the Usage Environment Installing as a Print Server This explains how to configure the share settings of and install the driver in order to use a computer connected to the device as a print server. Prerequisites ● When starting the computer, logon as a member of Administrators. ● Display the [Desktop] screen (when using Windows 8.1/Server 2012/Server 2012 R2). Procedures 1 2 Start the installer → proceed according to the instructions on the screen.
Changing Settings to Match the Usage Environment 5 Follow the instructions on the screen → click [Exit]. Related Topics Installing by Discovering Devices on a Network(P. 21) Installing by Specifying a Port or IP Address(P. 26) Setting up Clients of a Shared Printer(P.
Changing Settings to Match the Usage Environment Setting up Clients of a Shared Printer This explains the procedure for enabling printing from a client computer (hereafter referred to an "a client") using a print server on the same network. In environments where Windows Update can be used, it is not necessary to use the installer in order for the newest driver to be installed when selecting a print server. Prerequisites ● Configure the share settings of the print server driver.
Changing Settings to Match the Usage Environment Related Topics Installing as a Print Server(P. 42) Updating the Driver(P.
Changing Settings to Match the Usage Environment Changing the Port This explains the procedure for changing the port used by a device connected to a network. If you temporarily set a port for the device when installing the driver, change it to the correct port by following this procedure. Here, the method for creating a Raw or LPR port using a standard TCP/IP port is explained. Prerequisites ● Driver installation ● Confirm the name or IP address of the device (if adding a standard TCP/IP port).
Changing Settings to Match the Usage Environment When using an existing port: Select a port from [Port]. When adding a standard TCP/IP port: (1) Click [Add Port] → select [Standard TCP/IP Port] from [Available port types] → click [New Port]. (2) Enter the device name or IP address according to the instructions of the wizard. [Port Name] is automatically entered. Change the port name if required.
Changing Settings to Match the Usage Environment 5 Configure the port. When using Raw: Select [Raw] for [Protocol] → click [OK]. When using LPR: (1) Select [LPR] for [Protocol] → specify one of the following print queues for [LPR Settings] > [Queue Name]. LP: Outputs according to the spool setting of the device. This is the setting that is normally used. SPOOL: Always outputs after spooling to the hard disk, regardless of the device settings.
Changing Settings to Match the Usage Environment 6 Click [Close].
Changing Settings to Match the Usage Environment Installing the PPD File This explains the procedure for installing the PPD file (Printer Description Language file). If you print with the PS driver from an application such as PageMaker, QuarkXPress, etc. according to this operation, you can use the functions specific to the printer. To install the PPD file, you need to copy it to the specified location. 1 Double-click the file [gpps3.cab] in the following folder on the CD-ROM.
Making the Device Functions Usable Making the Device Functions Usable Making the Device Functions Usable ................................................................................................... 52 Setting Device Information ................................................................................................................................ 53 Device Functions Settings ......................................................................................................................
Making the Device Functions Usable Making the Device Functions Usable Setting Device Information(P. 53) Device Functions Settings(P. 58) Paper Sources and Output Destinations Settings(P. 59) Importing a Configuration Profile(P.
Making the Device Functions Usable Setting Device Information This explains the procedure for setting options installed in the device and making functions exclusive to the device usable. First, apply the configuration profile that matches the printer model to the driver, and change the settings in the [Device Settings] sheet. Next, set the device function and option information.
Making the Device Functions Usable 3 4 Display the [Device Settings] sheet. Check whether the configuration profile is suitable for the device you are using → if it does not match printer model, click [Change]. If a configuration profile that matches the printer model is set, skip to step 6.(P.
Making the Device Functions Usable IMPORTANT ● If you have not selected a configuration profile suitable for the device you are using, the device information may not be appropriately applied and some of the functions of the device may not be usable. Select a suitable configuration profile to display the required settings in the [Device Settings] sheet. Settings not displayed in the [Device Settings] sheet have not had the acquired device information applied to them.
Making the Device Functions Usable 6 Confirm that [Device Information] is set to [Auto] → click [OK]. If [Device Information] is set to [Auto], the device information is acquired and the device function and option information is set automatically. If you want to acquire the device information again when you have added an option etc., click [ ] (Retrieve Device Status Information). If [Device Information] is set to [Manual Settings], the device information is not acquired.
Making the Device Functions Usable NOTE ● Even if you can use the acquire device information function, some device information must be set manually. For details, refer to the explanation of the device functions settings. ● In any of the following cases, there is a possibility that you may not be able to acquire some of the device information. If that happens, set the options manually.
Making the Device Functions Usable Device Functions Settings This explains the functions that are set automatically by the acquire device information function and functions that must be set manually because their information cannot be acquired. NOTE ● When connected by a TCP/IP or IPP network, the device information can be acquired only by the driver.
Making the Device Functions Usable Paper Sources and Output Destinations Settings This explains the mapping between the driver settings and paper source and output destination options. Refer to the device settings of the configuration profile selected for [Config. Profile] in the [Device Settings] sheet. If [Basic Configuration (Canon)] is selected for [Config. Profile], refer to the settings for the printer model you are using. Laser Printers(P. 59) iR-ADV(P. 60) iR-ADV PRO(P. 62) imagePRESS(P.
Making the Device Functions Usable [Paper Source] Dialog Box [Standard Paper Source] A-1 [Drawer x 1] [Optional Drawer/Cassette] B-1 [Drawer x 1] B-2 [Drawer x 2] B-3 [Drawer x 3] B-4 [Drawer x 4] [Optional Deck] C-1 [Paper Deck Unit] D [Envelope Tray] iR-ADV Paper Source Settings [Paper Source] Dialog Box [Standard Paper Source] A-1 [Drawer x 1] A-2 [Drawer x 2] A-3 [Deck x 2 + Drawer x 2] 60
Making the Device Functions Usable [Optional Drawer/Cassette] B-1 [Drawer x 1] B-2 [Drawer x 2] B-3 [Drawer x 3] B-4 [1-Cassette Feeding Unit] B-5 [2-Cassette Feeding Unit] B-6 [3-Cassette Feeding Unit] B-7 [High Capacity Cassette Feeding Unit] [Optional Deck] C-1 [Paper Deck Unit] C-2 [POD Deck Lite] C-3 [Multi-drawer Paper Deck] [Inserter] D-1 [Document Insertion Unit (Tray x 2)] D-2 [Inserter of Paper Folding Unit/Document Insertion Unit (Tray x 1)] E [Inserters of Paper Folding Unit] [Envelope Feede
Making the Device Functions Usable [Paper Output Settings] Dialog Box A-1 [Copy Tray] B-1 [Inner Finisher Tray] B-2 [Inner Finisher Additional Tray] B-3 [Inner Tray 1] B-4 [Inner Tray 2] C-1 [Finisher Tray 1 [No Collating]] C-2 [Finisher Tray 2 [No Collating]] C-3 [Finisher Tray 1] C-4 [Finisher Tray 2] iR-ADV PRO Paper Source Settings [Paper Source] Dialog Box [Standard Paper Source] A-1 [Deck x 2 + Drawer x 2] 62
Making the Device Functions Usable [Optional Deck] B-1 [Paper Deck Unit] B-2 [POD Deck Lite] B-3 [Multi-drawer Paper Deck] [Inserter] C-1 [Document Insertion Unit] C-2 [Document Insertion Unit (Tray x 2)] C-3 [Inserter of Paper Folding Unit/Document Insertion Unit (Tray x 1)] Output Destinations Settings [Paper Output Settings] Dialog Box Finisher Tray A-1 [Finisher Tray 1] A-2 [Finisher Tray 2] A-3 [Finisher Tray 1 [No Collating]] A-4 [Finisher Tray 2 [No Collating]] 63
Making the Device Functions Usable imagePRESS Paper Source Settings [Paper Source] Dialog Box [Standard Paper Source] A-1 [Drawer x 3] A-2 [Deck x 1] A-3 [Deck x 2] [Optional Deck] B-1 [POD Deck Lite] B-2 [POD Deck] B-3 [POD Deck + Secondary POD Deck] B-4 [POD Deck + Secondary POD Deck x 2] B-5 [Multi-drawer Paper Deck] [Inserter] C-1 [Document Insertion Unit] C-2 [Document Insertion Unit (Tray x 2)] C-3 [Document Insertion Unit [iPR C7010VP/6010]] C-4 [Multi Drawer Document Insertion Unit] 64
Making the Device Functions Usable D [Inserters of Perfect Binder] E [Multi-purpose Tray] Output Destinations Settings [Paper Output Settings] Dialog Box Finisher Tray A-1 [Finisher Tray 1] A-2 [Finisher Tray 2] A-3 [Finisher Tray 1 [No Collating]] A-4 [Finisher Tray 1 [iPR C7010VP/6010]] A-5 [Finisher Tray 2 [iPR C7010VP/6010]] Stacker B-1 [Stacker a [Stack]] B-2 [Stacker b [Stack]] B-3 [Stacker a [Output Tray]] B-4 [Stacker b [Output Tray]] B-5 [Stacker a [Stack] [iPR C7010VP/6010]] B-6 [Stacker b [St
Making the Device Functions Usable B-7 [Stacker a [Output Tray] [iPR C7010VP/6010]] B-8 [Stacker b [Output Tray] [iPR C7010VP/6010]] All-in-One Printers Paper Source Settings [Paper Source] Dialog Box [Standard Paper Source] A-1 [Drawer x 1] A-2 [Drawer x 2] [Optional Drawer/Cassette] B-1 [Drawer x 1] B-2 [Drawer x 2] B-3 [Drawer x 3] B-4 [1-Cassette Feeding Unit] B-5 [2-Cassette Feeding Unit] B-6 [3-Cassette Feeding Unit] [Envelope Feeder] C-1 [Drawer 1] C-2 [Drawer 2] 66
Making the Device Functions Usable Output Destinations Settings [Paper Output Settings] Dialog Box A-1 [Copy Tray] A-2 [Inner Finisher Tray] A-3 [Inner Finisher Additional Tray] A-4 [Inner Tray 1] A-5 [Inner Tray 2] 67
Making the Device Functions Usable Importing a Configuration Profile This explains the procedure for importing an exported configuration profile file (*.typ) and setting the device information. If you cannot acquire the device information, you can apply it by importing a configuration profile exported in an environment where the information could be acquired. IMPORTANT ● If a configuration profile suitable for the device you are using is not selected, some of the device functions may not be usable.
Making the Device Functions Usable 4 Select [Select Manually] → click [ ] (Import Configuration Profile).
Making the Device Functions Usable 5 Select the configuration profile file to import → click [Open]. 6 Click [OK] → click [OK] in the [Device Settings] sheet.
Updating/Uninstalling the Driver Updating/Uninstalling the Driver Updating/Uninstalling the Driver .......................................................................................................... 72 Updating the Driver ............................................................................................................................................ 73 Uninstalling the Driver ..................................................................................................................
Updating/Uninstalling the Driver Updating/Uninstalling the Driver This explains the driver updating and uninstalling methods. It also explains the procedure for uninstalling the shortcut to the online manual. Updating the Driver(P. 73) Uninstalling the Driver(P. 75) Uninstalling the Shortcut to the Online Manual(P.
Updating/Uninstalling the Driver Updating the Driver You can update installed drivers to their newer versions. It is recommended that you download the latest drivers corresponding to new functions and/or operating systems, and update them. You can update already installed drivers at the same time as installing a driver for a new device, but here the procedure for updating installed drivers only is explained.
Updating/Uninstalling the Driver 4 Check [Printer List for Driver Installation] → click [Start]. If there are devices whose drivers you do not intend to update, click [Select Printers to Update] → deselect the devices from [Printer List] → click [OK]. 5 Click [Exit]. Restart your computer when a message is displayed prompting you to do so. When updating a driver on a print server, update the drivers on clients as well, referring to the procedure for setting computers as shared printer clients.
Updating/Uninstalling the Driver Uninstalling the Driver This explains the procedure for uninstalling a driver that is no longer needed. There are two methods: starting the uninstaller from Windows, and using the uninstaller in the accompanying CD-ROM or downloaded driver folder. Prerequisites ● When starting the computer, logon as a member of Administrators. ● Display the [Desktop] screen (when using Windows 8.1/Server 2012/Server 2012 R2). Procedures 1 Start the uninstaller of the driver.
Updating/Uninstalling the Driver 3 In the screen for confirming whether to delete the printer, click [Yes]. A confirmation message asking whether you want to delete the driver package as well may be displayed. 4 In the [Delete Printer] screen, click [Exit].
Updating/Uninstalling the Driver Uninstalling the Shortcut to the Online Manual This explains the procedure for uninstalling the shortcut to the website where online manuals for Canon products are available, which is created with the supplied CD-ROM. 1 Insert the supplied CD-ROM into your computer. 2 Click [Start Software Programs]. If the CD-ROM menu is not displayed, click the subsequent "Open details". Start the installer by following the procedure below.
Printing Printing Printing .................................................................................................................................................................. 79 Printing from a Computer ................................................................................................................................... 80 How to Refer to the Help .....................................................................................................................................
Printing Printing This explains the procedures for basic printing operations. You can check the help for details on how to use the driver. Printing from a Computer(P. 80) How to Refer to the Help(P.
Printing Printing from a Computer This explains the basic procedure for printing configuring the printer driver settings. NOTE ● When using a device connected via a WSD port, enable [Use WSD] at the device. 1 2 Select [Print] from the menu of the application. In the print screen, select the device you are using → click [Preferences], [Printer properties], or [Properties].
Printing 3 In the print settings screen of the driver, set the required items. If necessary, switch sheets and configure relevant settings.
Printing NOTE ● If the function you want to use is not displayed in the print settings screen, configure the print settings after enabling the functions of the device by acquiring the device information etc. 4 Click [OK]. 5 In the print screen, click [Print] or [OK]. Related Topics About This Driver(P. 9) Setting Device Information(P. 53) How to Refer to the Help(P.
Printing How to Refer to the Help For details about how to use the driver and each of the functions, refer to the help. The help is displayed by clicking [Help] in the print settings screen of the driver.
Troubleshooting Troubleshooting Troubleshooting ............................................................................................................................................... 85 Cannot discover a device connected via a WSD port .........................................................................................
Troubleshooting Troubleshooting This explains solutions to common problems. Cannot discover a device connected via a WSD port(P.
Troubleshooting Cannot discover a device connected via a WSD port A number of causes can be considered. Change the settings as required while referring to each "Remedy." Cause 1. The device settings are incorrect. Remedy Check whether the following have been set at the device. If they have not been set, change the settings or install the appropriate driver. ● The settings for both [Use WSD] and [Multicast Discovery Settings] are enabled.
SIL OPEN FONT LICENSE This Font Software is licensed under the SIL Open Font License, Version 1.1. This license is copied below, and is also available with a FAQ at: http://scripts.sil.org/OFL ----------------------------------------------------------SIL OPEN FONT LICENSE Version 1.
SIL OPEN FONT LICENSE 1) Neither the Font Software nor any of its individual components, in Original or Modified Versions, may be sold by itself. 2) Original or Modified Versions of the Font Software may be bundled, redistributed and/or sold with any software, provided that each copy contains the above copyright notice and this license.
