Generic Plus PS3 Printer Driver v1.21 User Guide for Windows (pdf)

Correcting Displacement During Booklet Printing
You can create and print a booklet while correcting the displacement between outer and inner pages that
occurs during booklet printing. If you trim the edges of the pages using a trimmer, you can adjust the amount
of margin so that the position of the print data on the page does not deviate between pages.
1
Display the [Basic Settings] or [Finishing] sheet.
2
Select [Booklet Printing] from [1-sided/2-sided/Booklet Printing] or [Print Style].
3
Click [Booklet].
4
Select [Booklet Printing Process] > [With Device Settings].
5
Select [Use Creep (Displacement) Correction] → select a correction method in
[Displacement Correction Method].
If you select [Manual Correction], specify the amount of print area displacement between the outermost page
and centermost page in [Correction Width].
6
Click [OK].
Related Topics
[Basic Settings] Sheet(P. 105)
[Finishing] Sheet(P. 111)
Booklet Printing(P. 37)
Creating a Booklet When Printing
39