[Windows] Generic Plus PCL6 Printer Driver User's Guide (V1.30)

Corrects displacement between outer and inner pages that occurs during booklet printing. Select a correction
method from [Displacement Correction Method]. When specifying the displacement width of the print area
between the outermost page and centermost page, select [Manual Correction] and specify a correction amount
in [Correction Width].
[Saddle Press]
Presses the pages so that they are attened when using saddle stitching with booklet printing. You can adjust
the strength of the press by setting [Saddle Press Adjustment].
[Saddle Stitch Setting]
Prints a booklet folded in half and stapled in the middle. When trimming to align the edges of the pages, select
[Fold + Saddle Stitch + Trim]/[Fold + Trim], and then set [Trim Settings] in the [Finishing] sheet.
[Binding Location]
Sets the edge of the paper to bind.
If you change [Orientation] in the [Basic Settings]/[Page Setup] sheet, [Binding Location] is changed to the left
or top. The long edge/short edge positional relationship is maintained.
[Gutter] > [Gutter Settings] Dialog Box
Enables you to set the gutter width.
[Staple/Collate/Group]
Sets the order of pages and whether to staple the pages when printing multiple copies.
Collate Group Staple
Eco (Staple-Free)
[Collate]
Outputs the specied number of copies in page order.
[Group]
Outputs the specied number of copies with all pages having the same page number grouped together.
[Staple + Collate]/[Eco (Staple-Free) + Collate]/[Staple + Group]/[Eco (Staple-Free) + Group]
Outputs the pages in the order specied for [Collate] or [Group] stapled together. "Eco (Staple-Free)" is a
method of xing pages together without using staples, and can be used when a nisher that supports binding
without staples is installed.
[Staple Position] > [Staple Position] Dialog Box
Enables you to set the position of the staple(s).
[Color Mode]
Switches between printing in color or in black-and-white. To detect automatically whether each page should be
printed in color or in black-and-white, select [Auto [Color/B&W]].
Settings List
96