Fax Driver v4.13.0 User Guide for Mac (pdf)

Cannot Register a Device Connected by Bonjour

When registering a device connected by Bonjour in the operating system, the corresponding device may not be

displayed in the [Add] dialog box.

If this happens, it could be due to a number of causes. Change settings as necessary by referring to each

"Remedy."

Cause 1.

The settings of the device are incorrect

Remedy

Conrm that the Bonjour settings in the control panel of the device are enabled. For details, refer to the

manual of the device.

Cause 2.

The network settings of the operating system are incorrect

Remedy

Check whether the necessary settings have been congured in the network settings of the operating system.

If they have not been set, change the settings according to the following procedure.

(1) Display the [System Preferences] dialog box of the operating system → click [Network].

(2) Enable the network settings you are using in the [Network] panel.

(3) Click the [Finder] icon → click [Finder] > [Preferences] in the menu bar.

(4) Click the [General] tab in the [Finder Preferences] dialog box → enable [Connected servers].

Cause 3.

The driver has not been installed correctly

Remedy

Reinstall the driver and register the device again.