Manual

15
Troubleshooting
Action
• Enter the correct network key and repeat the setup.
If the message still appears:
Check network connection referring to “Cannot Connect to the Network” (P.18).
Action
• Enter the correct network key and repeat the setup.
If the message still appears:
Check the WEP authentication settings of the wireless router.
Action
• Change the WEP authentication method on the machine to <Shared Key>.
Congure all the settings manually to change the setting to <Shared Key>.
(See the e-Manual)
If the message still appears:
When the MAC address lter is set at the wireless router, set the MAC address of
the machine to the wireless router. To check the MAC address of the machine, see
the e-Manual.
Prepare for Wireless LAN Connection
1
Setting the Wireless LAN
2
Installing the Software
3
Troubleshooting
4