Getting Started Guide

9
You can perform color correction by
selecting <Yes> to obtain optimum copy
results or printout results. For details
on the procedure, see the following
"Performing Color Correction."
•
Adjust image to
reproduce original
color?
NoYes
Press [OK].
Use the numeric keys, and
then press [OK].
Move the cursor with [ ] or [ ].
Switch to <AM> or <PM> with [ ] or [ ].
•
•
Current Time Settings
2010 01/01 12:52 AM
Performing Color Correction
Make sure that paper is
loaded, and then press [OK].
Confirm the procedure for color
correction, and then press [OK].
Open the feeder.
Place the test chart with the print side face down.
Place the paper so that the black stripe is at the back side
of the machine.
Supported paper:
Size: A4, LTR, 16K
Type: Plain 1/2, Rec
OK
Steps (Start:Press OK)
1. Print Adj. Image 1
2. Scan Adj. Image 1
Step 1
Printing adj. image 1.
Close the feeder.
A test chart (adjusted image 1) is printed.
Press [
] (Start).
Place adj. image 1 on
the glass with black
side toward the back.
Press [Color] start.
Step 2
Scanning adj. image 1.
Copy Image Adjustment
Copy: Press Start
100% LTR
Density: 0
Original Type: Text...
2-Sided: Off
1
+
-
1
An initial screen appears, and
initial setting is finished.
Remove the test chart (adjusted image 1) placed on the platen glass in Step .
Check the temperature of the installation site.
If the room temperature is low, correction may not be performed properly.
If <Adjustment failed.> appears
Is the paper loaded correctly?
Load plain paper or recycled paper of A4/Letter size in the paper cassette.
Is the test chart placed on the platen glass correctly?
Place the test chart with the print side face down and the black stripe toward the
back of the machine.
Has a paper jam occurred?
Remove the jammed paper.
If you want to perform color correction again, press [ ] (Menu), and then
select the following settings in the following order.
<Adjustment/Cleaning> → <Auto Gradation Adjustment> → <Copy Image
Adjustment>
•
→
•
→
•
→
Preface
1
Installing the Machine
2
Configuring and Connecting the Fax
3
Connecting to a Computer and
Installing the Drivers
4
Appendix
Color correction takes approximately 165
seconds.