Getting Started Guide

7
Load the paper.
When loading Legal size paper •
Hold the lock
release lever.
Adjust the length of
the paper cassette.
Make sure that the paper stack does not
exceed the line of the load limit mark.
Check!
Push in the paper cassette.
Hold the lock release lever and
slide the paper guides.
Slide the side paper guides.
Slide the paper guides to the
width of the loaded paper.
Slide the paper guides to the
width of the loaded paper.
Up to here
Align the edge of the paper stack with the
rear side of the paper cassette.
When using envelopes
For details on how to load media,
see "Basic Operation Guide."
Hold the lock release
lever and slide the paper
guides.
Spread the paper guides a
little wider than the actual
paper width.
Hold the lock release lever
and slide the paper guides.
Spread the paper guides a little
wider than the actual paper width.
Preface
1
Installing the Machine
2
Configuring and Connecting the Fax
3
Connecting to a Computer and
Installing the Drivers
4
Appendix
Set the paper under the hooks.
Load limit mark.
Hooks
Hooks
Hooks
When changing the size of the paper to be loaded
Be sure to register the paper size.
→ "Setting a Paper Size and Type" (P. 10)
•
When loading Legal size paper
When the paper cassette is inserted with it
extended, the front side of the paper cassette
is not flush with the front surface of the
machine as shown in the figure.
•
Set the Legal dust cover on the
paper cassette.