Operation Guide

10-6
Registering/Setting the Various Functions
P.6-26
P.6-26
P.6-27
P.6-27
P.6-27
P.6-27
P.6-26
P.6-26
Continues from the previous page
Continues to the upper right
Use HTTP
On
Off
SNMP Settings
Enable Dedicated Port
On
Off
On
Off
On
Off
0to515 to 65535
LPD
0to9100 to 65535
RAW
0to80 to 65535
HTTP
0to161 to 65535
SNMP
public
Community Name 1
(None)
Community Name 2
Writable SNMP 1/Writable SNMP 2
Read-Write (RW)
Read-Only (RO)
Off
Dedicated Community Settings
Printer Management Infomation from Host
On
Off
Startup Settings
0 to 300 (Seconds)
Port Number Settings
Continues from the lower left
UFRII LT
UFRII LT(XPS)
FAX
Network
UFRII LT(XPS)
UFRII LT
USB
On
Off
Restrict Sending from History
On
Off
Fax No. Confirmation Re-Entry
Confirm Sequential Broadcast
Reject Sequential Broadcast
Off
Restrict Sequential Broadcast
On
Off
Allow Driver Faxing
On
Off
Display Job History
CD-ROM
On
Off
USB Device On/Off
CD-ROM
On
Off
Memory Media Storage On/Off
CD-ROM
Select PDL (Plug-n-Play)
CD-ROM
Auto Detect
MAC Address
On
Ethernet Driver Settings
Fax Settings
Communications Settings
33600 bps
14400 bps
9600 bps
7200 bps
4800 bps
2400 bps
Send Start Speed
Receive Start Speed
Device Information
Dept. ID Management
Network Settings
Communications Settings
Forwarding Settings
Store/Print When Forwarding
Remote UI On/Off
Restrict Sending
Display Job History
USB Device On/Off
Memory Media Storage On/Off
Select PDL (Plug-n-Play)
Initialize All
System Manager Information
Update the Firmware
Initialize Address Book
Initialize System Settings
CD-ROM
CD-ROM
CD-ROM
TX Image Report
Off
On
Print Reports Lists
Off
On
For Errors Only
Send Results
Coded Dial
One-Touch
Group
Address Book List
Off
On
For Errors Only
Receive Report
User Data
Fax Activity Report
Transmission Management
Reports Settings
CD-ROM
CD-ROM
Auto Print After 40 Transmissions
Off
On
Separate Send/Receive
Off
On
On
Off
On
Off
Memory Lock Settings
Canada (CA)
United States (US)
Mexico (MX)
Other
Brazil (BR)
Select Country/Region
Memory Lock PIN
Print Report
Do Not Set
Memory Lock Time
Set
- Memory Lock Start Time
- Memory Lock End Time
Off
- Communication Mode:
Half Duplex, Full Duplex
- Ethernet Type:
10 Base-T, 100 Base-TX
Reports
1
2
<How to display>
Press [Report].
The report output menu is displayed.
2
1
P.6-27
P.6-27
Address Book PIN
On
Off
Restrict New Destinations
Restrict Sending
On
Off
Forwarding Settings
On
Off
Remote UI On/Off
CD-ROM
Store/Print When Forwarding
CD-ROM
On
For Errors Only
Off
Print Images
For Errors Only
Do Not Store
Store Images in Memory
LPD Settings
Off
Use WSD Settings
On
Off
RAW Settings
On
On
Off
Use WSD Browsing
On
Off
Use Multicast Discovery
On
Off
WSD Settings
P.6-14