Technical information

COPYRIGHT © 2000 CANON INC. 2000 2000 2000 ColorPASS-Z40e/Z20e REV.0 AUG. 2000
CHAPTER 2 PREPARING FOR INSTALLATION
2-4
b. CLC700/800/900
1) If a toggle switch is found on the image processor ED PCB of the CLC700/800/900 Se-
ries, set the switch to the left. If no toggle switch is found, you may skip the setting.
2) Set the following in user mode I/F switching.
T02-201-01
3) Select settings for service mode. (For details, see the copier’ Service Manual.)
a. ADJUST PASCAL-MD
Specify whether the gradation should be smoothed for output form the ColorPASS:
0: Do not change
1: Do not use
2: Smooth gradation. (However, copying speed will be lower by 0.5 sec.)
b. OPTION REMOTE
Set it to suit the preference of the user.
c. OPTION IPU-TYPE
Set it to ‘00’.
d. OPTION FIL-TYPE
Set it to ‘01’.
F02-201-02
Copier User mode setting
I/F switching
CLC700/800 Before step 2 A
CLC700/800/900 After step 3 C
Toggle switch