Technical information

COPYRIGHT © 2000 CANON INC. 2000 2000 2000 ColorPASS-Z40e/Z20e REV.0 AUG. 2000
CHAPTER 2 PREPARING FOR INSTALLATION
2-12
5) Insert five screws into the holes on the
supports of the ColorPASS as shown in
the following illustration. Tighten the
screws.
Upper side three places TP screws
(M4×10).
Lower side two places RS tightening
screws (M4×33).
F02-400-05
Inserting screws into ColorPASS supports
6) Fix the power cable in place to the
ColorPASS using three cable clamps.
F02-400-06 Fix the power cable