Technical information

COPYRIGHT © 2000 CANON INC. 2000 2000 2000 ColorPASS-Z40e/Z20e REV.0 AUG. 2000
CHAPTER 3 INSTALLATION
3-2
3. Power on the ColorPASS using the switch at the side of the ColorPASS. The power sup-
ply automatically senses the correct voltage.
4. To confirm that the ColorPASS is operating properly allow ColorPASS startup to pro-
ceed without interruption while you watch the Control Panel. Do not press any buttons
on the Control Panel.
5. Allow the system to proceed to Idle to confirm that the ColorPASS is operating cor-
rectly.
The message Check power and cable may display in the Control Panel during the startup
process. Once the ColorPASS is connected to the copier the message should no longer
be displayed.
F03-101-02
Server Name
Idle
3744MB X.0
Info