Technical information

2000 CANON INC. 2000 2000 2000 ColorPASS-Z40e/Z20e REV.0 AUG. 2000

CHAPTER 3 INSTALLATION

3-5

1.3.2 Checking Scanning and Printing

The Test Scan/Print function scans whatever is placed on the copier glass and prints it to

the copier. This test can be used to check the scanning capabilities of the ColorPASS. You

can compare the original with the output to make sure the connection between the

ColorPASS and the copier is working properly.

a. To Run Test Scan/Print

1. Place the document that you want to scan on the copier glass.

2. At the Idle screen, press the menu button once to display the Functions menu.

F03-103-02

3. Select Run Diagnostics from the Functions menu.

4. At the Diagnostics screen, select Test Scan/Print.

The message Scanning from copier and printing.... is displayed.

F03-103-03

5. When the ColorPASS is finished printing, compare the output from the copier to the

original.

Print Pages

Suspend Printing

Resume Printing

Shut Down

Functions

Clear Server

Run Setup

Run Diagnostics

Calibration

Functions

Use the line selection

button to the right to

select Run Diagnostics.

Test Scan/Print

Test I/F board

Functions

Select Test Scan/Print