Technical information

COPYRIGHT © 2000 CANON INC. 2000 2000 2000 ColorPASS-Z40e/Z20e REV.0 AUG. 2000
CHAPTER 4 DISASSEMBLY/ASSEMBLY
4-5
3 Externals
3.1 To open the ColorPASS
1. Make sure you have powered off the ColorPASS and removed all the cables from the
back.
2. Remove the screw beneach the front edge of the ColorPASS.
3. Pull back the two clips beneach the front edge of the ColorPASS to release the front of
the top panel. (see F04-301-01 on page 4-5).
4. Push the top panel toward the back panel so that the three hooks on the back edge of the
top panel release from the chassis.
F04-301-01 Removing the ColorPASS top panel
5. Disconnect the UIB cable from the top panel.
6. Remove the access panel from the top of the ColorPASS.
UIB cable
Front edge of
ColorPASS
Back edge of top panel