Technical information

COPYRIGHT © 2000 CANON INC. 2000 2000 2000 ColorPASS-Z40e/Z20e REV.0 AUG. 2000
CHAPTER 4 DISASSEMBLY/ASSEMBLY
4-13
5.2.2 To Replace the SCSI Board
1. Reseat the SCSI board in motherboard connectorPCI1. The component side of the board
should be facing the copier.
The board connector is keyed to fit only one way when properly oriented.
2. Attach the board mounting bracket screw to the bracket in slot 2.
3. Reassemble the ColorPASS and verify its functionality (see the connection verification
steps described in “Restoring ColorPASS functionality after service” on page 4-10).