Technical information

COPYRIGHT © 2000 CANON INC. 2000 2000 2000 ColorPASS-Z40e/Z20e REV.0 AUG. 2000
CHAPTER 4 DISASSEMBLY/ASSEMBLY
4-32
5.9.2 Removing and replacing the power supply
This section describes how to remove and replace the power supply.
a. To Remove the Power Supply
1. Power off and open the ColorPASS as described in “To shut down the ColorPASS” on
page 4-4 and “To open the ColorPASS” on page 4-5.
2. Disconnect the power supply cable from its connectors on the motherboard and HDD.
3. Remove the four screws on the back panel of the ColorPASS that attach the power sup-
ply to the tray (see F04-509-01 on page 4-34).
Memo
Be sure to hold the power supply while you remove the screws.
4. Remove the power supply.
F04-509-01 Removing the power supply
Motherboard
Power supply