User's Manual

4. Detaching the Blank Exposure Lamp
1) Detach the blank exposure assembly. (See “3. Detaching the Blank Exposure
Assembly on p. 4-34.”)
2) Remove the four screws q, and disconnect the connector w.
Figure 4-310
3) Disconnect the connector e.
Figure 4-311
COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 IMAGE FORMATION SYSTEM
4-35
qq
w
e