User's Manual

6. Positioning the Blank Shutter Solenoid
Adjust the position of the solenoid so that the bottom A is 7.7 ±0.5 mm on both sides
of the shutter when the solenoid is moved in the direction of activation. When taking
measurements, do not push down the shutter.
After adjustments, make sure that the solenoid moves smoothly.
Figure 4-314
a
Figure 4-314b
COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 IMAGE FORMATION SYSTEM
4-37
A