User's Manual

7. Routing the Blanking Cable
Figure 4-315
8. Positioning the Left/Right Margin
Turn the blanking shutter adjusting screw on the copier’s front side plate shown in
Figure 4-316 so that the standards are met.
q clockwise turn moves the margin to the front.
w counterclockwise turn moves the margin to the rear.
e a full turn moves about 1 mm.
Figure 4-316
COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 IMAGE FORMATION SYSTEM
4-38
Put the spring on the outside.
Slide shutter (rear)
Wind 3.5 items
Slide shutter (front)
q