User's Manual

3) Open the lower right cover.
4) Remove the two screws w, and pull out the paper guide plate toward the front.
Figure 5-702
Note:
You will have sufficient access to the pick-up roller and the bushing at the rear in
this condition.
5) Push in the pick-up roller e from the direction of step 4) toward the rear, and remove
the bushing r while lowering it to the lower left.
Figure 5-703
COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 5 PICK-UP/FEEDING SYSTEM
5-17